[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ttylinux , qemu and eth0



Is correct , but ...
I try this command :
$ qemu -drive file=disk.img,if=ide,media=disk  -cdrom ttylinux-
i686-11.2.iso -net
type=user ,macaddr=xx:xx:xx:xx:xx:xx ,connect=localhost, -net
nic,model=pcnet,vlan=0 -net user,vlan=0
now i set IP with ifconfig ..
but why not install  the package nano ?
repo is down ?
where is packages ,I need to see what I need to install ...
On Jan 22, 2:07 am, ggbutcher <[email protected]> wrote:
> Yes, qemu by default starts an internal vlan that 1) presents a nic to
> the os, and 2) interfaces to the host computer's internet connection
> to provide a path to the internet.  I use this regularly with ttylinux
> 12.3 on both Windows and Ubuntu.
>
> You need to make sure the default ethernet driver qemu is using
> matches with the drivers ttylinux will try to use.  pxe-e1000.bin is
> the one qemu uses that works for me, on Windows qemu...
>
> g
>
> On Jan 19, 7:47 pm, Douglas Jerome <[email protected]> wrote:
>
>
>
>
>
>
>
> > catafest wrote:
> > > Hi
> > > I need some help .
> > > My eth0 under ttylinux with qemu , not working ...
>
> > > Error is :
> > > Ifconfig : SIOCSIFADDR: No such device .
> > > i have just l0 interface ...
>
> > > On boot i strat with:
> > >  ttylinux enet
>
> > > Qemu command is :
> > > qemu -drive file=disk.img,if=ide,media=disk -cdrom ttylinux-
> > > i686-11.2.iso
>
> > > Maybe is a qemu command ...
> > > Thank you .
>
> > I have:
>
> > $ qemu --version
> > QEMU emulator version 0.13.0, Copyright (c) 2003-2008 Fabrice Bellard
>
> > And I ran these commands:
>
> > $ dd if=/dev/zero of=disk.img bs=10M count=1
> > 1+0 records in
> > 1+0 records out
> > 10485760 bytes (10 MB) copied, 0.108013 s, 97.1 MB/s
> > $ qemu -drive file=disk.img,if=ide,media=disk \
> >         -cdrom ttylinux-i686-11.2.iso
>
> > And then started ttylinux with "ttylinux enet" and udhcpc
> > got an ip address. I check the boot messages with
> > "dmesg | grep eth0" and see the kernel messages where it
> > found an e1000 NIC. ifconfig shows both eth0 and lo.